The Gentec-EO HP100A-50KW-GD detector measures up to 50 kW of laser power and is less sensitive to variations in water cooling temperature than any other high-power water-cooled meter on the market. Custom models handle up to 120 000 W of continuous power.

Features:

• CUSTOM-BUILT: Contact us with your requirements for a version tailored to your needs
• THE HIGHEST POWER HANDLING: Custom models handle up to 120 000 W of continuous power. Higher powers are available upon request.
• STABLE READING: Less sensitive to variations in water cooling temperature than any other high-power water-cooled meter on the market.
• INFINITE CUSTOMIZATION CAPABILITIES
• Choose your size
• Choose your maximum power
• We will customize one just for you!
• COMPACT AND LIGHT WEIGHT: Lighter and more compact than any other high-power detector on the market, thanks to our unique design.
• AVAILABLE WITH YAG AND CO2 CALIBRATION: All HP models can be calibrated at YAG and CO2 wavelengths with a calibration uncertainty of +/- 5%.
• DIRECT USB CONNECTION TO A PC: Each head comes with both a DB-15 connector (for use with a Gentec-EO monitor) and a USB2.0 output for direct connection to a PC. Other connectors are available upon request.

Compatible Displays and PC interfaces:

Fully compatible with MAESTRO, TUNER and UNO display devices. (see below).

MAESTRO: Touchscreen display device for power & energy measurement. Single-channel, multiple outputs (USB, Ethernet, analog).

TUNER: Display device with tuning needle for power measurement. Single-channel.

UNO: Economical display device for power measurement. Single-channel.

HP100A-50KW-GD detector specifications:

• Maximum average power (continuous): 50000 W
• Minimum average power(1): 1000 W
• Noise equivalent power(2): 200 W
• Spectral range: 0.8 - 12 μm
• Typical rise time: 80 sec
• Power calibration uncertainty: ±5 %
• Back reflections: ~ 2.5 %
• Linearity with power: ±2 %
• Linearity vs beam diameter: ±2 %
• Linearity vs beam position: ±1.5 %
• Calibrated spectral range: 1030 - 1080 nm

(1). For lower powers, call your Gentec-EO representative.

(2). Nominal value. Actual value depends on electrical noise in the measurement system.

Introducing the HP Series of high power detectors.