piezosystem jena

piezosystems jena: Introducing hpower – the new force in dynamic applications

In almost every industrial application there are parts that have to be moved under extreme conditions. As technology advances, many of these applications require faster, more powerful, high-precision motion. The need for dynamics motion is growing. hpower actuators provide a solution to these challenges by combining unique features such as force generation of up to 50kN and a frequency spectrum of up to 70kHz. hpower actuators can be used in vacuum environments and at temperatures from -60°C to +200°C. At the same time, the solid-state design prevents any mechanical play and allows a compact build size.

piezosystem jena Piezo Actuator Stacks

Stacks - Multi-layer Piezo Actuators - Stack Actuators - With or without pre-Loading, and with or without casing

piezosystem jena Stack actuators offer small precise fast repeatable motion in one axis. They have extremely long lifetimes, and some models can move very large masses for shake or shock material testing applications.

piezosystem jena Piezo Actuator Rings

Rings - Actuators With An Open Center - Ring Actuators - With or without Pre-Loading, and with or without Housing

An Open Aperture for Lasers or Mechanics

A piezosystem jena ring actuator is similar to a 1-axis stack actuator, except that has a center aperture for light or instruments to pass through. These are often used in microscopy, laser or other photonic applications.

piezosystem jena Piezo Stages one-axis

One Axis - Stages For Single-plane Movement - Ideally Suited for Precise nm Positioning

Stages that Move in a Single X or Z Axis

piezosystem jena One axis stages offer the ability to precisely position samples or other objects in one direction. Special versions are available for use in vacuum or cryogenic conditions, as well as designs for easy integration into larger OEM assemblies.

piezosystem jena Piezo Stages two-axis

Two Axis - Stages For Two-planes of Movement - Ideally Suited for Precise nm Positioning in 2D Stages that Move in Two Axes

piezosystem jena Two axis stages offer the ability to precisely position samples or other objects in both X and Y directions. Special versions are available for use in vacuum or cryogenic conditions, as well as designs with center apertures to allow the passage of light through the stage for photonic applications.

piezosystem jena Piezo Stages three-axis

Three Axis - TRITOR Stages - Ideally Suited for Precise nm Positioning in Three Dimensions

X, Y and Z Precise Positioning

piezosystem jena TRITOR® nanopositioners are extremely compact but offer motions of up to 400 µm in all three X, Y and Z axes. Parallel motion is achieved without mechanical play due to the system’s rigid design. As an option, integrated position control systems for overcoming the effect of hysteresis are available.

piezosystem jena Piezo Stages five-axis

Five Axis - The PENTOR Stage - Ideally Suited for Precise nm Positioning in Five Dimensions

Three-Axis + Tip-Tilt Precise Positioning -

Optical stages often require an open aperture for passing light through. The piezosystem jena PENTOR translation and tilting system was developed with a 17 mm free center hole for such applications. It offers motion in X, Y and Z directions of 100 µm, and a tilt of ±2 mrad on two orthogonal axes.

piezosystem jena Piezo Tilting Stages one-axis TS

One Axis - Tilting Stages For Mirrors - Ideally Suited for Precise nm Beam Steering

Compact Single Axis Solutions 

piezosystem jena One-axis tilting stages offer highly repeatable tilting motion with large displacement of up to 35 mrad (2 degrees). These stages are ideal for steering mirrors, with different versions available for different size mirrors.

piezosystem jena Piezo Tilting Stages two-axisTS

Two Axis - Tilting Stages For Mirrors - Ideally Suited for Precise nm Beam Steering

Two Axis Tip-Tilt Solutions

piezosystem jena Two-axis tilting stages offer highly repeatable tilting motions with large displacements of up to 40 mrad. These tilting stages are ideal for use as fast steering mirrors (FSMs) in Lidar, OISL, or other beam steering applications.

piezosystem jena Piezo Tilting Stages three-axis TS

Three Axis - Tilting Stages For Mirrors - Ideally Suited for Precise nm Beam Steering

Three Axis Tip-Tilt Solutions

piezosystem jena Three axis tilting stages offer all the fast steering mirror capabilities of two-axis tip-tilt stages, but with the additional benefit of Z-axis control. This is beneficial in applications where thermal expansion of a system needs to be adjusted for as well as this allows for phase shift corrections. These stages offer highly precise and repeatable motions.

piezosystem jena Positioning Tools MIPOS

MIPOS Series -  Piezo Focus Positioners - The piezo focus lens positioner series MIPOS is made for high precision and accurate micro lens movement.

Bring Your Microscope to the Next Level

piezosystem jena MIPOS objective/lens positioners allow a microscope or other optical device to precisely focus with sub-nanometer resolution. The positioners are simple to attach to standard microscopes and provide a quick easy way to upgrade a microscopy system.

piezosystem jena Positioning Tools MICI

MICI Series - A Micrometer Screw Positioner - Piezo technology allows for precision motion and repeatability - with 3 choices for size and function.

Improve Your Micro-Assembly Process

piezosystem jena MICI micrometer screw positioners can be used in many applications including improving the the positioning-resolution of linear stages. They have high resonant frequencies which allows for dynamic operation and the precise movement of heavy loads.

piezosystem jena Positioning Tools GRIPPY

Grippy Series -  Piezo Driven Fiber Grippers - Designed for Micro-positioning and Handling Applications

Improve your Fiber Handling

piezosystem jena Piezo fiber grippers will precisely grip and hold optical fibers and other small components in assembly and testing machines. The grippers can be adjusted for desired gripping pressure and are often used in OEM manufacturing and research applications.

piezosystem jena Fiber Switches

Fiber Switches - The easy way to upgrade your system - Designed for Fiber Switching 1x2 to 1x9

Switch-up Your Fiber

piezosystem jena Piezo-electric driven switches are especially designed for fast switching – measured in milliseconds. Piezo actuators enable the optical switch to couple optical fibers with an accuracy of a few microns. The piezo driven optical switches are available fiber core diameters of 50 µm up to 600 µm.

piezosystem jena Special Solutions Scanius

Scanius System - Large Travel Scanning and Alignment - Precision scanning control over distance.

Scanning Samples With High Accuracy

The piezosystem jena Scanius XY stages is designed for positioning samples over long travel while maintaining a very high precision standard. This stage provides a better and more elegant solution for working with samples and objects. The combination of high resolution and easy integration makes this system ideal for a variety of applications.

piezosystem jena Special Solutions Shutter Slit Systems

Shutter Slit Systems - For Controlling Light - Piezo technology allows for precision beam control.

For Laser Optics, Spectroscopy and Switches

piezosystem jena Shutter slit systems utilize a single piezo stack acctuator to create symmetrical an open-close motion of two slit edges. The most common market for these systems is the photonics industry where they are used for beam shaping and collimation.

piezosystem jena Special Solutions hPower Shock and Shaker

hpower - Shock and Shake Solutions - High-power piezo-electric actuators

For Impact and Vibration Testing

piezosystem jena hpower shock and shake actuators paired with an hpower amplifier are high-power systems often used for material, vibration and acceleration testing. Compared to common alternatives with similar strength, hpower systems are usually faster, smaller and more exact.

Discover the world of piezosystem jena: New product line-up and new website

Piezosystem jena, world leaders in piezo technology and nano-positioning, have released a range of new products, and introduced an all new website to showcase their full portfolio.

piezosystem jena PAHS Series Piezo Actuator: perfect solution when space is limited but high resolution requirements exist

The new piezosystem jena PAHS piezo actuators achieve higher motion than a conventional actuator of similar length. With more than four times higher travel they are a perfect solution when space is limited but high resolution requirements exist.

piezosystem jena MIPOS Series Piezo Focus Positioners: Objective Positioner Systems in semiconductor manufacturing and other applications

Semiconductor manufacturers design chips with structures down to 4nm. This requires positioning systems with the highest level of precision in terms of minimal deviation, high resolution and fast step-settle times. For inspection tools it is critical to focus on specific points as repeatable and as accurate as possible, with nearly a 0% failure rate.

piezosystem jena SCANIUS-LINE – Moving into a new direction

The new SCANIUS-LINE combines long travel with the accuracy and load capacity of a piezo drive in a compact design.

piezosystem jena presents the new SCANIUS product line of piezobased long travel stages. Starting with the SCANIUStwo XY stage, piezosystem jena will introduce new stages in the following months.

The new product development is based on the use of piezoelectric ultrasonic motors. The advantage of these motors is the permanent frictional connection between drive and output. This ensures that the moving planes are always positioned securely,  even when the power is switched off.

Piezosystem Jena ScaniusOne: Single axis precision positioning system with travel up to 120mm

The piezosystem jena ScaniusOne is designed for positioning or scanning objects over large areas – up to 120 mm. This piezo based system will provide unmatched precision.

piezosystem jena PZ 250 CAP: Precise positioning of semiconductor wafers with diameters up to 12”

piezosystem jena One Channel Amplifiers - 10mA

Small, Digital, 1-Channel Amplifier

USB connected devices have become common in lab environments. The nano box USB is a standalone piezo amplifier with 16 bit D/A resolution. Its small size and powerful amplifier includes a USB 2.0 interface that offers a variety of helpful commands.

piezosystem jena One Channel Amplifiers - 40mA

Analog and Digital 1-Channel Amplifiers

Piezo amplifiers/controllers are designed for high precision low to mid-speed positioning of low-voltage piezo actuators. These amplifiers are tuned for extremely high output stability and extremely low signal noise at the output. A low amplifier signal-to-noise ratio is very important because it determines the total resolution of the actuator. The nearly unlimited resolution of piezo-electric actuators using these amplifiers results in ultra-precise movement.

piezosystem jena One Channel Amplifiers - 100mA

Analog and Digital 1-Channel Amplifiers: Multiple Options for Single Channel Needs

Piezo amplifiers/controllers are designed for high precision positioning of low-voltage piezo actuators. These amplifiers are tuned for extremely high output stability and extremely low signal noise at the output. A low amplifier signal-to-noise ratio is very important because it determines the total resolution of the actuator. The nearly unlimited resolution of piezo-electric actuators using these amplifiers results in ultra-precise movement.

piezosystem jena One Channel Amplifiers - 300mA

Analog and Digital 1-Channel Amplifiers: Multiple Options for Single Channel needs

Piezo amplifiers/controllers are designed for high precision positioning of low-voltage piezo actuators. These amplifiers are tuned for extremely high output stability and extremely low signal noise at the output. A low amplifier signal-to-noise ratio is very important because it determines the total resolution of the actuator. The nearly unlimited resolution of piezo-electric actuators using these amplifiers results in ultra-precise movement.

piezosystem jena Multi-Channel Amplifiers - 40mA

Control Multiple Actuators with One Controller: NV 40/3 for multiple analog amplifier channels

For the precise nanometer movement of actuators and other piezo products, an amplifier is required. Multi-channel amplifiers allow you to control multiple actuators or piezo products with a single amplifier. The NV40/3 piezo amplifier was designed for controlling low voltage piezo elements. It includes a voltage amplifier, a display and a PC-interface. The high-resolution display shows the voltage of the actuator, along with the mode of operation and the temperature inside the amplifier.

piezosystem jena Multi-Channel Amplifiers - 120mA

Control Multiple Actuators with One Controller: d-Drive pro multi-channels for multiple actuators

The 120 mA 3-channel d-Drive pro amplifier is designed for extremely low voltage noise and high performance. Like the entire d-Drive series of amplifiers, the d-Drive pro can be controlled via PC. The controller also can act as a freely programmable frequency generator, and you can adjust slew-rate, and notch and low pass filters.

piezosystem jena Modular Amplifiers - 10mA to 800mA

Power Supply, Controllers & Case = Custom Solution: Modular to fit your specific needs

An EN modular multi-channel solution is composed of an ENT power supply, one or more ENV controllers/amplifiers and a case. Depending on the specific application, multiple control modules can be used. This allows for the most cost effective solution for the highest precision piezo control system.

piezosystem jena Modular Amplifiers - 50mA

Interface, Amplifiers & Case = Custom Solution: Modular to fit your specific needs

The d-Drive® modular piezo controller system from piezosystem jena combines the highest positioning accuracy with a personalized design. A complete system contains an EDS interface (with display and controls), paired with a variety of EVD digital amplifiers, all contained in a 19-inch rack-case.

piezosystem jena High Power Amplifiers

Special high power amplifiers for hpower stack, ring, shake and shock actuators

For hpower high-power actuators, high-power amplifiers are required. Together these hpower actuators and amplifier systems deliver exceptionally fast response times, superior dynamics, high force generation, and nanometer precision.

piezosystem jena Humidity Resistant Fiber Switches

By applying a silicon coating to internal components, these unique piezosystem jena fiber switches are shielded from high levels of moisture in the air. This greatly increases their ability to withstand relative humidity up to 98% before failure. 

piezosystem jena: New SPI Control Box offers High-Speed Synchronous Communication for multi-axis positioners

The piezosystem jena SPI Control Box is a 3-channel controller interface that is optimized for NV200/D NET amplifiers and supports up to three single- or multi-axis positioners.

piezosystem jena CuX Piezo Stacks: Multilayer piezo actuator stacks with copper inner electrodes for higher performance, humidity resistance and longer lifetime

Compact Power. Unmatched Durability. Discover CuX Piezo Stacks

The piezosystem jena CuX series provides compact, high-efficiency multilayer piezo actuator stacks designed for demanding industrial and scientific applications. Engineered using advanced piezoceramic (PZT) materials, these stacks offer rapid response times, exceptional durability, and precise displacement across a wide range of voltages.