Abet Technologies LS 150 Xenon Arc Lamp Source

Abet Ls150

Features 

150 W Xe Arc Lamp 
Fast F/1.0 condenser 
Unlimited expansion possibilities 
OEM ready 
 
Introduction 
The patent pending LS-150 is a compact, integrated, functional and stable 150 watt arc lamp based light source. The entire source, power supply, lamp, and optical compartment are housed in an extremely compact enclosure, 9 x 6 x 11 inches. The unit’s base allows mounting on inch or metric spaced optical tables with the optics centered over the hole pattern to allow for easy integration with the rest of your setup.
Having the complete source in a single enclosure assures that any EMI generated during ignition is contained inside the housing. It also eliminates the need for costly shielded cables and connectors. 
 
Optical System 
The optical compartment of the LS-150 contains the lamp, a fused silica F/1.0 condenser, a rear reflector to collect and direct radiation emitted from the back of the lamp, all controls necessary to maximize collection and target the output beam to it’s desired location. The lamp is mounted, strain free, on swing out lamp mount making lamp replacement a simple, no tools required operation.
Electronics Compartment 
The electronics compartment houses the low ripple power supply, a low noise and vibration cooling fan, an elapsed time meter for keeping track of lamp hours, and system interlocks. The safety interlocks will shut the entire system down in the case of a fan failure. Door interlocks for both the electronics and optical compartments will shut the system down to prevent exposure to hazardous voltages, current, and high intensity light if the doors are opened during system operation 
 
High Stability Option 
Each LS-150 is supplied with a high stability option that is easy to install in the field. This option isolates the optical compartment from small amounts of vibration that might be introduced by the system cooling fan and can produce significant stability improvement. 
 
Accessories 
Accessories are easily accommodated with a flexible design front plate. Abet accessories as well as any 1.035-40 thread optics cells and 30 mm cage mount system components mount directly to the front plate. A number of inexpensive adapters to industry standard interfaces are available to accommodate C-mount and Newport-Oriel flange based components. 
You are here: Home Lasers & Sources Light Sources Arc Lamps Abet Technologies LS 150 Xenon Arc Lamp Source