HighFinesse: External and Internal Calibration Sources

calibration sources

HighFinesse offer a range of calibration sources to ensure the highest accuracy and stability of measurements with their Wavelength Meters, and for use in other applications. Integrated calibration sources with absolute accuracy of up to 60 MHz, provide autocalibration for standard HighFinesse Wavelength Meters. In addition, HighFinesse offers a variety of frequency stabilized, narrow linewidth laser sources for different applications down to ± 2 MHz absolute accuracy. They are ideally for quick and accurate calibration of the Ultimate-series of HighFinesse Wavelength Meters. These include:

  • SLR-series: stabilized on atomic transitions, narrow linewidth, optimally used for WS-Ultimate. Available in different wavelengths, such as: 780, 850, 895, 1532, and 1555 nm
  • SL-series: Helium-Neon Lasers at 633nm+/-10MHz, and 633nm +/-25MHz
  • Infrared Helium-Neon Laser: best for the Laser Spectrum Analyzer, LSA IR-III, at 3.39 micron

Read more ...

HighFinesse: Optical Spectrum Analysers

OSA

HighFinesse optical spectrometers LSA and HDSA are designed to analyse the multi-line or broadband spectrum of (un-)known light sources like cw and pulsed lasers, gas discharge lamps, super luminescence diodes, semiconductor laser diodes and LEDs. They are suitable to analyze the spectrum of telecom signals, resolve Fabry-Perot modes of a gain chip, and produce a spectral measurement of gas absorption.

Main Benefits and Features

  • Pulsed and cw lasers
  • Extremely wide range: 192 nm - 11 µm
  • High-speed Measurements
  • Data control through easy access API
  • (LabView, C++, MathLab, ...)
  • External Trigger (TTL), optional
  • Laser Control (PID), optional

Read more ...

High Finesse Precision Current Sources: From MicroAmps to hundreds of Amps

precision current sources

HighFinessePrecision Current Sources have been developed for experiments and quantum technologies in the areas of cold-atom and solid state physics. The linearly regulated BCS (Bipolar Current Source) and UCS (Unipolar Current Source) series deliver highly stable, low noise source currents for high precision magnetic field control. The current output is floating or is on a used defined potential. Ultrafast response to control signals and trigger functions, clear grounding, connection and signal isolation schemes make the integration of the current sources into complex experimental systems easy.

Read more ...

Gentec-EO Laser Beam Diagnostics

Beamage 4M

Gentec-EO offer camera-based devices with wavelength ranges from UV to IR. All cameras are USB3.0, for the fastest data transfer rates.

Details of available models are listed below.

Read more ...

Gentec-EO Beamage 3.0: The First Ever USB 3.0 Beam Profiling Camera

Gentec Beamage 3.0

Gentec Electro-Optics, Inc.(Quebec City, Canada), is proud to launch the Beamage 3.0, the very first USB 3.0 camera dedicated to Laser Beam Profiling. This new CMOS-based camera comes with a completely redesigned software that features both a highly intuitive user interface and powerful data analysis tools. 

The USB 3.0 Advantage 

The USB 3.0 interface of the new Beamage 3.0 camera features a data transfer rate up to 10X faster than any USB 2.0 system. This incredible speed allows for much faster data transfer rates, up to 10 fps at 1 MPixels. USB 3.0 also features an improved communication architecture that reduces both data transmission latency and power consumption. Read more.

Read more ...

Gentec-EO introduce Automated M-Squared Measurement System

 BeamageM2

 

Gentec Electro-Optics, Inc is proud to announce its new solution for measuring the quality of a laser beam. With the Beamage-M2 system system, M2 measurements are taken directly in software which controls both the acquisition and the calculations. An easy step-by-step procedure is clearly indicated directly in the software and allows the user to get ISO-compliant M2 measurements in less than a minute.

  • Large Apertures: The only M2 system on the market equipped with a complete set of 50mm optics. Also, the sensor is 11.3 x 11.3 mm.
  • Simple Alignment: Two beam-steering mirrors are included for quick and easy alignment of your laser into the system. The internal mirrors are factory-aligned and the pre-set height also simplifies the alignment
  • Compact: The low-profile ingenious mechanics make it easy to fit the device on any optical table
  • ISO Compliant: The calculations are fully compliant to the ISO 11146 and 13694 standards
  • Fast Acquisition: Make a complete, ISO-compliant measurement in only 20 seconds with the ROI feature, and in less than a minute with full-frame acquisition
  • Flexible & Intuitive Software: In the easy-to-navigate software, both automatic and manual settings are available, so data points can be added or removed even after an automatic scan is completed.

Read more ...

Gentec-EO launch 4.2MPixel Camera for Laser Beam Profiling

Gentec 42

Gentec Electro-Optics, Inc., has just launched a new 4.2 MPixels model in its popular Beamage Series. The Beamage-4M presents twice as many pixels as the regular Beamage-3.0, in the same compact package. Read more.

Read more ...

Gentec-EO OEM detectors

oem detect perfo

Gentec-EO offers OEM customers the highest flexibility so that you make no compromise. Whether you want a different housing, a specific sensititivity or another output connector, Gentec-EO have a solution for you, and can customize existing models or design a whole new detector to meet your needs. Further details available here.

Gentec-EO High Power Detector Solutions

FLASH 500 55

Gentec-EO has the most complete high power product line on the market, with solutions for powers as high as 25 000 W, more upon request.

Full details of available standard products are listed below.

Read more ...

Gentec-EO Laser Power & Energy Monitors

MAESTRO in Multiple Languages

The Gentec-EO monitors come in various sizes and types to cover all applications. We have monitors with or without display (PC-based) and for power or energy readings, or both. We also offer the fastest digital needle display on the market. Please see below for a complete listing of all availble products.

Read more ...

You are here: Home Lasers & Sources Laser Measurement