• Ekspla FP200 Compact Picosecond Fiber Laser

    LightWire FP200 Compact Picosecond Fiber Laser

    Ekspla'sLightWire FP200 laser is dedicated for researchers and OEM integrators, who require small, convenient and maintenance free source with transform limited picosecond pulses.

    Widely tunable pulse repetition rate 20 kHz – 40 MHz makes it an excellent choice for non-linear microscopy, time-resolved spectroscopy, terahertz spectroscopy, ultrafast metrology applications. FP200 model is available with second harmonic option (532 nm). Read more

    Read more

  • Ekspla SL212 Series SBS Compressed Picosecond Nd:YAG Lasers

    SL212 series SBS compressed Q switched NdYAG Laser 1

    Ekspla's  SL212 laser is excellent solution for applications, where high energy picosecond pulses are needed. In contrary to conventional mode-locked lasers the SL212 series lasers use different method of generating short pulses based on backward-stimulated Brillouin scattering (SBS). Diode pumped passive Q-switched single longitudinal mode (SLM) nanosecond generator is the heart of the system. It provides nanosecond optical pulse that is later compressed during SBS in a special cell.

    Pulse compressor consists of optical guiding system and SBS-cell. SBS cell is designed for safe and longlife maintenance free operation. A linearly polarized light pulse from master oscillator passes through QWP and is focused into SBS-cell by lens. Focusing is arranged in the way to compress the pulse via SBS process. The backscattered Stokes pulse, as its phase is reversed, strictly repeats the path of pump pulse in the opposite direction and with a reversal divergence. The compressed pulse is guided into the amplification stage using polarizer and mirror.

    After SBS compression, pulse is directed to multi-pass flashlamp pumped power amplifier system, providing high-energy pulses. SL212 model lasers use multi-pass amplifier system which is based on laser chamber containing Nd:YAG rod pumped by two flash lamps. For smooth obtaining output beam profile pre-amplifier and double-pass amplifier layout is used in SL212 series lasers. Power amplifier includes optical components arranging passes through the active element. Aperture is employed to prevent the returning depolarized radiation from getting back into the amplifier.

    Thermocontrolled harmonics’ generators, based on angle-tuned non-linear crystals and harmonic separation optics are available as standard options. Fundamental and second harmonics are separated and has a single output port. Harmonics’ crystals mounted in temperature‑controlled heaters. Pulse compression during SBS, is a simple and cost effective way for generating high power picosecond pulses. In addition to it, SBS compression allows generation of pulses with exceptional pulse duration range: from 150 ps up to 1000 ps. A power supply and water/water type cooling units, placed in standard 19” rack, requires a little space under the user’s optical table. Read more. 

    Read more

  • Ekspla PL2210 Series Diode Pumped Picosecond kHz Pulsed Nd:YAG Lasers

    PL2210 series diode pumped picosecond mode locked NdYAG laser

    Ekspla's PL2210 series diode-pumped, air-cooled, mode-locked Nd:YAG lasers provide picosecond pulses at a kilohertz pulse repetition rate.
    Short pulse duration, excellent pulse-to-pulse stability, superior beam quality makes PL2210 series diode pumped picosecond lasers well suited for many applications, including material processing, time-resolved spectroscopy, optical parametric generator pumping, and other tasks.

    Flexible Design

    PL2210 series lasers offer a number of optional items that extend the capabilities of the laser. A pulse picker option allows control of the pulse repetition rate of the laser and operation in single-shot mode. The repetition rate and timing of pulses can be locked to an external RF source (with –PLL option) or other ultrafast laser system (with –FS option). The laser provides a triggering pulse for synchronization of the customer‘s equipment. A low jitter SYNC OUT pulse has a lead up to 500 ns that can be adjusted in ~0.25 ns steps from a PC. Up to 400 μs lead of triggering pulse is available as a PRETRIG option that is designed to provide precise, very low jitter trigger pulses for a streak camera. Custom-built models with higher pulse energy are available on request.

    Built-in Harmonic Generation

    Automated angle-tuned non-linear crystals mounted in temperature stabilized heaters are used for second, third and fourth high spectral purity harmonic generation.

    Simple and Convenient Laser Control

    The laser can be controlled from a user-friendly remote control pad or USB interface. The remote pad allows easy control of all parameters and features. Alternatively, the laser can be controlled from a computer with supplied software for a Windows™ operating system. LabVIEW™ drivers are supplied as well. Read More.

    Read more

  • Ekspla SL330 Series SBS Compressed Picosecond Nd:YAG Lasers

    Picosecond SBS compressed high energy NdYAG lasers SL330 series 2

    Ekspla's SL300 series lasersare an excellent solution for applications that require high energy picosecond pulses. Pulse compression during backward‑stimulated Brillouin scattering (SBS), used in EKSPLA SL300 series lasers, is a simple and cost‑efficient way to generate picosecond pulses, with the unique capability of producing pulses with tunable duration.

    An electro-optically Q-switched Single Longitudinal Mode (SLM) nanosecond generator is the heart of the system. Instead of external narrow linewidth diode lasers, the selective properties of Fabry-Perrot etalon, and a laser cavity are used to produce SLM pulses with a smooth temporal envelope. In scientific literature this method of generating SLM pulses is known as a selfseeding technique.

    Pulse compression is done in a SBS‑cell. Depending on the geometry of interaction, a pulse with duration in the 170 – 1500 ps range can be produced. Pulse duration can be tuned in discrete steps when a variable pulse duration option (-VPx) is installed. After SBS compression, the pulse is directed to a multi-pass power amplifier system for amplification to up to 500 mJ energy.

    Temperature controlled harmonics generators, based on angle-tuned KD*P and KDP crystals and harmonic separation optics, are available as standard options. Each wavelength has a separate output port.

    A power supply and cooling units are placed in a standard 19” rack that requires little space under an optical table. The very low jitter of the optical pulse relative to the Q-switch triggering pulse ensures reliable synchronization of the laser with external equipment. For customer convenience the laser can be controlled from a user-friendly remote control pad or RS232 interface. The remote pad allows easy control of all laser parameters and features a backlit display that is easy to read even when wearing laser safety eyewear. Alternatively, the laser can be controlled from a personal computer with supplied software for a Windows™ operating system. LabView™ drivers are supplied as well. Read more

    Read more

  • Ekspla SL230 Series SBS Compressed Picosecond Nd:YAG Lasers

    SL230 series SBS compressed NdYAG laser 1

    Ekspla's  SL 230 series lasers are excellent solution for applications, where high energy picosecond pulses are needed. Not like conventional mode-locked lasers that typically uses saturable nonlinear absorption or Kerr lensing to produce ultrafast pulses, the SL230 series lasers employ backwardstimulated Brillouin scattering (SBS) in liquid for the same purpose.

    Innovative Design

    Diode pumped electro-optically Q-switched single longitudinal mode (SLM) nanosecond generator is the heart of the system. It provides nanosecond optical pulse that is later compressed during SBS in a special cell.

    Q-switched master oscillator allows precise external triggering with jitter of less than 0.2 ns rms while modelocked lasers typically have jitters of at least of tens of nanoseconds or even worse. Precise sync pulses from internal delay generator are also available with less than 200 ps rms jitter in respect to optical pulse.

    Pulse compression is done in SBS‑cell. The geometry of interaction is designed to produce shortest and most stable pulses with 100 ps duration. After SBS compression, pulse is directed to multi-pass flashlamp pumped power amplifier for amplification to up to 250 mJ pulse energy.

    Some versions, like SL230 and SL231 are available with diode pumped power amplifier. Thermocontrolled harmonics generators, based on angle-tuned KD*P and KDP crystals and harmonic separation optics are available as standard options. Each wavelength has a separate output port.

    Build in energy monitors continuously monitors output pulse energy. Data from the energy monitor can be seen on the remote keypad or on PC screen. Power supply and cooling units are mounted into standard 19” rack.

    Simple and Convenient Laser Control

    Laser is controlled by PC via USB port with application for Windows™ operating system. In addition, major settings of laser can be controlled through user‑friendly remote control pad. The remote pad features a backlit display that is easy to read even while wearing laser safety eyewear. Read more. 

    Read more

  • Ekspla PL3140 Series Picosecond Nd:YLF Lasers

    PL3140 series picosecond mode locked NdYLF laser 1

    Ekspla Nd:YLF mode-locked PL3143 series picosecond lasers produces high energy pulses with as short as 10 ps pulse duration.

    Rugged and Reliable Design

    Diode pumped mode-locked quasi‑CW master oscillator produces the train of the pulses that is guided to the regenerative amplifier for further amplification. The single pulse is cavity‑dumped from regenerative amplifier and then amplified by linear amplifiers to up to 80 mJ pulse energy. The output pulse energy can be adjusted in approximately 1 % steps from 1 mJ to nominal output, at the same time pulse-to-pulse energy stability remains less than 1.5 % rms at 1053 nm.

    Angle-tuned KD*P and KDP crystals mounted in thermostabilised ovens are used for second, third and fourth harmonic generation. Harmonics separators ensure high spectral purity of each harmonic directed to different output port. Build in energy monitors continuously monitors output pulse energy. Data from the energy monitor can be seen on the remote keypad or on PC monitor.

    The laser provides triggering pulse for synchronization of customer‘s equipment with lead up to 500 ns. The lead of triggering pulse can be adjusted in ~0.25 ns steps from control pad or PC. PRETRIG option is offered for streak camera triggering  and can provide pulse with up to 1000 μs lead that can be adjusted from PC with approx. 33 ns step.

    Simple and Convenient Laser Control

    For customer convenience the laser can be controlled via user-friendly remote control pad. The remote pad allows easy control of all the parameters and features a backlit display that is easy to read even when wearing laser safety eyewear. Alternatively, the laser can be controlled from personal computer via USB port using supplied software for Windows™ operating system. LabView™ drivers are supplied as well. Read more. 

    Read more

  • Ekspla PL2250 Series Flashlamp Pumped Picosecond Nd:YAG Lasers

    PL2250 series flash lamp pumped picosecond NdYAG laser

    Ekspla's PL2250 series lasers set a new standard in high pulse energy picosecond lasers. Their innovative and cost-effective design improves laser reliability and reduces running and maintenance costs.

    Innovative Design

    The heart of the system is a diode pumped solid state (DPSS) master oscillator placed in a hermetically sealed monolithic block. The flashlamp pumped regenerative amplifier is replaced by an innovative diode pumped regenerative amplifier. Diode pumping results in negligible thermal lensing, which allows operation of the regenerative amplifier at variable repetition rates, as well as improved long-term stability and maintenance-free operation.

    The optimized multiple-pass power amplifier is flashlamp pumped and is optimized for efficient amplification of pulse while maintaining a near Gaussian beam profile and low wavefront distortion. The output pulse energy can be adjusted in approximately 1% steps, at the same time as pulse-to-pulse energy stability remains less than 0.8% rms at 1064 nm. Angle‑tuned KD*P and KDP crystals mounted in thermostabilised ovens are used for second, third and fourth harmonic generation. Harmonics separators ensure the high spectral purity of each harmonic directed to different output ports. Read more.

    Read more

  • Ekspla PL2230 series high energy full DPSS mode-locked Nd:YAG lasers

    PL2230 series Diode Pumped High Energy Picosecond NdYAG Lasers

    Ekspla is proud to introduce the PL2230 Series, the first commercial fully diode pumped high pulse energy mode-locked laser, producing 28 ps pulses with up to 35 mJ (50 mJ preliminary) at 50 Hz pulse repetition rate.

    Innovative Design

    The heart of the system is a diode pumped solid state (DPSS) master oscillator placed in a sealed monolithic block, producing high repetition rate pulse trains (88 MHz) with a low single pulse energy of several nJ. Diode pumped amplifiers are used for amplification of the pulse to 35 mJ (140 mJ preliminary) output. The high‑gain regenerative amplifier has an amplification factor in the proximity of 106. After the regenerative amplifier, the pulse is directed to a multipass power amplifier that is optimized for efficient stored energy extraction from the Nd:YAG rod, while maintaining a near Gaussian beam profile and low wavefront distortion. The output pulse energy can be adjusted in approximately 1% steps, while pulse‑to-pulse energy stability remains at less than 0.5% rms at 1064 nm.  Read more

    Read more

You are here: Home Ekspla: Browse all products here Ekspla Picosecond Lasers