|
Basic modules of the modular electronic system for operation of diode lasers are current and temperature controls. Other add-on modules are available. The range of products is steadily growing due to acute customer demand. DC110 Series - electronic modules - DC 110 - diode laser supply and control rack.
- DC 110/Mon - monitor unit with LCD display.
- DCC 110 - low noise current control module.
- DTC 110 - temperature control module.
- SC 110 - scan generator with HV amplifier.
- DCB 110 - computer analog interface.
- PID 110 - proportional-integral-differential regulator module.
- FALC 110 - fast analog linewidth control.
- LIR 110 - lock-in regulator module.
- PDD 110 - Pound-Drever-Hall detector module.
- DigiLock 110 - digital feedback controlyzer.
Stand-alone units - iScan - versatile mode monitor and frequency control.
- LaseLock - universal lock-box for laser frequency stabilization.
- LCC - laser coherence control.
- miniScan - scan generator with piezo driver and photo diode amplifier.
- VFG 150 - versatile 150 MHz function generator.
|
|
|
- Tunable diode laser in pro design
- Wide wavelength selection available: 370 nm .. 1770 nm
- Output powers up to 300 mW
- Ultra stable, typical linewidth 100 kHz .. 1 MHz (5 µs)
- Very low drift with room temperature changes (typ. << 100 MHz/K)
- Insensitive to acoustics and vibrations
- Easy coarse tuning up to 100 nm
- Mode-hop-free tuning up to 50 GHz (optimized virtual pivot point)
- Beam angle compensation mirror included
- Fast AC and DC current modulation included
The DL 100 / pro design combines the advantages of two successful TOPTICA lasers: all diodes for the DL 100 are available in the superior mechanical design of the pro series . The pro series mechanics is ultra stable and easy to use. The DL 100 / pro design specifications depend strongly on the implemented laser diode and are given in TOPTICA’s laser diode stock lists. |
|
Read more...
|
|
|
- Economic, tunable cw diode laser in Littrow / Haensch design
- Wide wavelength selection available: 370 nm .. 1770 nm
- Output powers up to 300 mW
- Typical linewidth (5 µs) 100 kHz .. 1 MHz
- Mode-hop free tuning typically 20 GHz
- Beam angle compensation mirror included
- Modular design with hands-on set-up
TOPTICA’s DL 100 is a well-established and economic laser source for spectroscopy and many other scientific applications. It is an open system that can be changed and maintained by the experienced user. The DL 100’s specifications depend strongly on the implemented laser diode and are given in TOPTICA’s laser diode stock lists. |
|
Read more...
|
|
|
- Single-frequency laser with distributed feedback diode
- Any wavelength between 760 nm .. 2880 nm available
- Output power up to 150 mW
- Largest mode-hop free tuning range: Up to 1400 GHz (4 nm)
- Linewidth typ. 0.5 .. 4 MHz, coherence length 25 .. 200 m
- Reliable operation even in harsh environments
- Options: High-frequency modulation, optical isolation, fiber output
Distributed feedback (DFB) lasers offer wide frequency tuning and high output power in a compact, rugged setup. The frequency selective element – a Bragg grating – is integrated into the active section of the semiconductor and ensures single-frequency operation without any bulk optics. A wide variety of DFB diodes is available from stock; custom wavelengths can be provided even in low quantities. |
|
Read more...
|
|
|
- Tunable diode laser in pro design ECDL setup
- Available with four exceptional AR diodes around 780 nm, 850 nm, 940 nm, and 1040 nm
- Output powers up to 100 mW
- Ultra stable, typical linewidth 100 kHz (5 µs)
- Very low drift with room temperature changes (typ. << 100 MHz/K)
- Insensitive to acoustics and vibrations
- Easy coarse tuning up to 100 nm
- Mode-hop free tuning up to 50 GHz (optimized virtual pivot point)
- Beam angle compensation mirror included
- Fast AC and DC current modulation included
The DL pro is the ultimate tunable diode laser. Its revolutionary mechanical design allows both easy operation and extreme stability at the same time. The underlying Littrow geometry allows for highest output powers, and optimum mode-hop free tuning is realized with a perfectly positioned virtual pivot point for the grating movement. |
|
Read more...
|
|
|
- Power up to 1 W
- Center wavelengths 765 nm or 780 nm
- Single frequency
- Nearly diffraction limited output beam
(M² typ. 1.5, fiber coupling efficiency > 50 %) - Coarse wavelength selection ± 5 nm around center wavelength
- Mode-hop free tuning > 15 GHz
The DLX 110 is an external cavity grating stabilized diode laser (ECDL) with a special high power laser diode. It delivers high powers with a good beam profile. The mechanical design is insensitive to acoustic noise and vibrations. The DLX 110 is a cost-effective solution for delivering tunable, narrow bandwidth,and high power laser radiation. |
|
Read more...
|
|
|
 - MOPA configuration in pro design
- High power, up to 1.5 W
- Nearly diffraction limited output beam
(M² typ. < 1.5, fiber coupling efficiency typ. 60 %) - Ultra stable, typical linewidth 100 kHz (5 µs), low drift
- Mode-hop free tuning up to 50 GHz (optimized virtual pivot point)
- New amplifier chip module with thermal management and custom optics
- Ultra stable mirror mounts with flexure design
- Rigid housing made from a solid metal block
- Fast AC and DC current modulation for master and amplifier included
The TA pro is the flagship product of TOPTICAs high power tunable diode laser solutions. Its tapered amplifier technology allows for high power with excellent beam quality, while at the same time maintaining the excellent spectral properties of the pro master laser. The TA pro is a completely revised version of a very well-established laser system, the TA 100. It has been optimized for extreme stability and ease of use, and has proved these properties in numerous tests in TOPTICAs laboratories. |
|
Read more...
|
|
|
- Compact and economic optical amplifier
- Ideally suited to amplify TOPTICAs diode lasers,
also suited for third party products - Wavelength range 649 .. 1083 nm
- High power, up to 1.5 W
- Nearly diffraction limited output beam with suitable master oscillator
(M² typ. < 1.5, fiber coupling efficiency typ. 60 %) - Integrated driver concept, most compact
- Computer controlled (RS 232)
The BoosTA is a compact and economical optical amplifier. Just put light into it, and it amplifies it up to a factor 100. The spectral properties of the master laser are preserved. The BoosTA includes computer controlled integrated electronics, and all optics for accepting a collimated and linearly polarized input beam. Custom optics and good thermal management guarantee best performance.
|
|
Read more...
|
|
|
- Frequency doubling of Ti:Sapphire, dye, gas, fiber and diode lasers
- Compact, stand-alone bow-tie cavity
- pro technology for highest mechanical and thermal stability
- Highest cw conversion rates
- Near TEM00 beam profile
- Mode matching and beam shaping optics integrated
- Optional fiber coupling of input and/or output beam
The SHG pro is the device of choice if existing lasers are to be frequency doubled. Designed in TOPTICA’s pro technology, it unites highly stable performance and convenient operation. Mirror and crystal holders can be adjusted without opening the resonator cover. A wide range of non-linear crystals covers SHG wavelengths from 205 to 800 nm. TOPTICA offers competent support for adapting the unit to customer requirements. |
|
Read more...
|
|
|
<< Start < Prev 1 2 3 Next > End >>
|
| Results 10 - 18 of 21 |
Lasers & Light 
