|
- Tunable diode laser in pro design ECDL setup
- Available with four exceptional AR diodes around 780 nm, 850 nm, 940 nm, and 1040 nm
- Output powers up to 100 mW
- Ultra stable, typical linewidth 100 kHz (5 µs)
- Very low drift with room temperature changes (typ. << 100 MHz/K)
- Insensitive to acoustics and vibrations
- Easy coarse tuning up to 100 nm
- Mode-hop free tuning up to 50 GHz (optimized virtual pivot point)
- Beam angle compensation mirror included
- Fast AC and DC current modulation included
The DL pro is the ultimate tunable diode laser. Its revolutionary mechanical design allows both easy operation and extreme stability at the same time. The underlying Littrow geometry allows for highest output powers, and optimum mode-hop free tuning is realized with a perfectly positioned virtual pivot point for the grating movement. |
|
Read more...
|
|
|
- Power up to 1 W
- Center wavelengths 765 nm or 780 nm
- Single frequency
- Nearly diffraction limited output beam
(M² typ. 1.5, fiber coupling efficiency > 50 %) - Coarse wavelength selection ± 5 nm around center wavelength
- Mode-hop free tuning > 15 GHz
The DLX 110 is an external cavity grating stabilized diode laser (ECDL) with a special high power laser diode. It delivers high powers with a good beam profile. The mechanical design is insensitive to acoustic noise and vibrations. The DLX 110 is a cost-effective solution for delivering tunable, narrow bandwidth,and high power laser radiation. |
|
Read more...
|
|
|
 - MOPA configuration in pro design
- High power, up to 1.5 W
- Nearly diffraction limited output beam
(M² typ. < 1.5, fiber coupling efficiency typ. 60 %) - Ultra stable, typical linewidth 100 kHz (5 µs), low drift
- Mode-hop free tuning up to 50 GHz (optimized virtual pivot point)
- New amplifier chip module with thermal management and custom optics
- Ultra stable mirror mounts with flexure design
- Rigid housing made from a solid metal block
- Fast AC and DC current modulation for master and amplifier included
The TA pro is the flagship product of TOPTICAs high power tunable diode laser solutions. Its tapered amplifier technology allows for high power with excellent beam quality, while at the same time maintaining the excellent spectral properties of the pro master laser. The TA pro is a completely revised version of a very well-established laser system, the TA 100. It has been optimized for extreme stability and ease of use, and has proved these properties in numerous tests in TOPTICAs laboratories. |
|
Read more...
|
|
|
- Compact and economic optical amplifier
- Ideally suited to amplify TOPTICAs diode lasers,
also suited for third party products - Wavelength range 649 .. 1083 nm
- High power, up to 1.5 W
- Nearly diffraction limited output beam with suitable master oscillator
(M² typ. < 1.5, fiber coupling efficiency typ. 60 %) - Integrated driver concept, most compact
- Computer controlled (RS 232)
The BoosTA is a compact and economical optical amplifier. Just put light into it, and it amplifies it up to a factor 100. The spectral properties of the master laser are preserved. The BoosTA includes computer controlled integrated electronics, and all optics for accepting a collimated and linearly polarized input beam. Custom optics and good thermal management guarantee best performance.
|
|
Read more...
|
|
|
- Frequency doubling of Ti:Sapphire, dye, gas, fiber and diode lasers
- Compact, stand-alone bow-tie cavity
- pro technology for highest mechanical and thermal stability
- Highest cw conversion rates
- Near TEM00 beam profile
- Mode matching and beam shaping optics integrated
- Optional fiber coupling of input and/or output beam
The SHG pro is the device of choice if existing lasers are to be frequency doubled. Designed in TOPTICA’s pro technology, it unites highly stable performance and convenient operation. Mirror and crystal holders can be adjusted without opening the resonator cover. A wide range of non-linear crystals covers SHG wavelengths from 205 to 800 nm. TOPTICA offers competent support for adapting the unit to customer requirements. |
|
Read more...
|
|
|
- UV, blue, green, yellow wavelengths: 320 .. 590 nm
- High power: Up to 2 W
- Single-frequency operation, linewidth < 500 kHz (typ.)
- Seed: Tunable, grating stabilized diode laser
- Amplifier: Semiconductor or fiber amplifier
- SHG: Resonant frequency doubling stage
- Probe beam output of fundamental laser
- Mode matching and beam shaping optics integrated
- Increased amplitude stability with "noise eater" option
The TA / FA SHG pro system comprises a tunable, grating-stabilized diode laser, a high power semiconductor (TA) or fiber (FA) amplifier, and an integrated frequency doubling stage (SHG pro). The SHG stage is a folded ring cavity in bow-tie configuration with excellent thermal and mechanical stability. The system provides tunable laser radiation for spectroscopy, laser cooling, optical data storage, holography and interferometry.
|
|
Read more...
|
|
|
- Tunable “deep UV” laser radiation: 205 .. 295 nm
- Up to 100 mW output power
- Transversal single-mode beam, single-frequency output
- Linewidth 1 MHz typ., can be narrowed by active frequency locking
- Seed: Tunable, grating stabilized diode laser
- Amplifier: Semiconductor or fiber amplifier
- Two cascaded SHG pro doubling stages
- Designed for ultra high resolution spectroscopy (e.g. Hg, H, Mg, Al)
The TA / FA FHG pro is a tunable, diode-based laser source in the deep UV spectral range. The system consists of an external cavity diode laser, a high power semiconductor (TA) or fiber (FA) amplifier, and two cascaded second harmonic generation stages (SHG pro). The TA / FA FHG pro systems cover wavelengths from 200 nm to 295 nm – with best possible beam quality, long coherence length, true cw operation, and in a reliable setup. |
|
Read more...
|
|
|
- BlueMode Technology for Interferometry, Raman Spectroscopy, Holography, Quantum Cryptography
- 50 mW @ 405 nm, free-beam output
- Linewidth < 5 MHz (< 0.003 pm), coherence length > 25 m
- Wavelength stability < 0.05 pm/h, constant environmental conditions
- Long-term power stability < 0.6 % peak-peak, constant conditions
- Relative intensity noise ≤ -135 dB, 10 kHz .. 100 MHz
- Built-in optical isolator and beam shaping
- Optional single-mode fiber coupling, typ. 60 % efficiency
The BlueMode laser sets new records for blue-violet diodes. It is the first laser that unites high power, high coherence and superior long-term mode stability in a compact and rugged design. BlueMode is based on proprietary technology, developed by TOPTICA for demanding measurement tasks in both scientific research and industrial applications. Directly available are research grade lasers; OEM solutions are provided upon request.
|
|
Read more...
|
|
|
Lasers & Light 
