• Abberior Instruments and Super Resolution Microscopy at Lastek
    Abberior Instruments and Super Resolution Microscopy at Lastek

    Abberior Instruments has partnered with Lastek in Australia and New Zealand to offer the most complete experience for super resolution microscopy. Read more here.

  • Raptor Photonics OWL 640 SWIR camera
    Raptor Photonics OWL 640 SWIR camera

    Raptor Photonics OWL 640 is the best performing SWIR camera in the world. Demonstration system now available. Please enquire for details. Read more.

  • Toptica: DL pro with Digital Laser Controller DLC pro
    Toptica: DL pro with Digital Laser Controller DLC pro

    The new digital laser controller for TOPTICA’s tunable diode laser DL pro sets new benchmarks with regards to low noise and low drift levels.

    Demonstration system now available. Please enquire for details. Read more...

  • High Finesse Laser Spectrum Analyzer Spectrometer for Broadband Sources
    High Finesse Laser Spectrum Analyzer Spectrometer for Broadband Sources

    The High Finesse LSA Laser Spectrum Analyser analyses multi-line or broadband spectra of cw and pulsed lasers, gas discharge lamps, and more.  Lastek currently have a demonstration system available for evaluation. Read more...

  • Alio Industries: True Nano™ Precision Motion Systems
    Alio Industries: True Nano™ Precision Motion Systems

    ALIO Designs and Manufacturers Proprietary Robotic Devices and Tools that Enable Precise Nano-Scale Movements for Manufacturing and Research & Development

    Read more...

Lasermet High Integrity Laser Safety Beam Shutter

LS 20 range

The Lasermet LS-20 Laser Safety Shutter is intended to provide a means of preventing accidental exposure to a potentially harmful laser beam. It has been designed to form part of a high-integrity safety system and features a gravity-close blade and force-disconnect proving contacts. When closed, the shutter deflects the incoming laser beam onto an internal beam dump where the energy is converted to heat which is dissipated in the aluminium casing of the shutter. When the shutter is open, the laser beam passes through the shutter without interruption.

LS 20SIL SIL3 rated shutter on optical pin

SIL Rated Version

A 'SIL3' version is available which, when correctly wired to a Lasermet Interlock Control System, can provide a safety interlock which meets Safety Integrity Level 3 to EN61508 and Performance Level 'e' to EN ISO 13849-1.

Control Options

Standard operation is by means of the 'Open' and 'Close' buttons on top of the shutter case. A remote switching station (LS-RS20) is available for remote operation of the shutter. Alternatively the shutter can be set to open as soon as power is applied. In all cases the shutter will close when power is removed.

Connection to Beam Tube System

The LS-20 has 16 mm diameter entry and exit apertures. These are threaded and beam tubes can be supplied to fit to the shutter case and enclose the laser beam.

Beam Shutter for High Power Lasers

The maximum average power for use with the internal beam dump is 20 W. However for higher powers the beam dump can be easily removed by unscrewing it from the side of the shutter case. Beam tubes can be fitted and the beam can be directed to a remote beam dump. This allows the shutter to be used for much higher powers, even for multi-kilowatt lasers.

Shutter Blade Options

The shutter blade is made of stainless steel which is sufficient for most applications. However, standard front silvered or dielectric mirrors can be factory fitted to the blade if required. This is generally recommended for average powers in excess of 20W when the remote beam dump option is being used. It may also be advisable when using Q-switched lasers as these can cause some minor ablation of the blade even when the average power is below 20W.

Fixings

The LS-20 shutter is equipped with an M6 female thread in the base, located under the beam centreline. An anti-rotation slot is also provided in the base into which a second M6 stud should be located to prevent the shutter turning or coming unscrewed. The slot allows for posts on imperial and metric optical breadboards.

Laser Beam Power Measurement

When fitted with a mirror, the LS-20 facilitates easy laser beam power measurement. The beam dump can be removed and a laser power meter detector head fitted to the side of the shutter. In this way a power or energy reading can be obtained whenever the shutter is in the closed state.

You are here: Home Lasermet High Integrity Laser Safety Beam Shutter